Teltonika Calyx EBD050 — SIM Pack | SIMSY Shop
Teltonika Calyx EBD050 5G Pi Hat
5G on a Raspberry Pi
SIM pack
Tested with SIMSY

Teltonika Calyx EBD050

The EBD050 is the flagship of the Calyx family — a full 5G Sub-6 GHz cellular HAT+ that turns a Raspberry Pi 4 or Pi 5 into a high-throughput 5G edge device. Designed for the deployments where 4G isn't enough: HD camera streams, edge inference, real-time control, industrial signage. Same Pi HAT form factor, same GPIO modem control, same fanless design — the difference is in the modem.

Edge AI & IoTRoboticsPi Hat developer guideCellular Private LAN
£259ex VAT
+£51.80 UK VAT · £310.80 inc VAT
See compatible routers

Key features

  • 5G NR Sub-6 GHz — significantly higher throughput than the 4G variant
  • Raspberry Pi HAT+ form factor — Pi 4 / Pi 5 compatible
  • High-speed USB 3 host interface for 5G throughput off-board
  • GPIO modem control — wake, reset, power-cycle from the Pi
  • PCM audio interface
  • Fanless industrial-grade build

Technical specifications

Cellular

RAT
5G NR Sub-6 GHz
Fallback
4G LTE + 3G
SIM slot
1× Nano-SIM (4FF)
Antennas
4× SMA (5G MIMO)

Host integration

Form factor
Raspberry Pi HAT+ (40-pin GPIO)
Compatible boards
Raspberry Pi 4 + Pi 5
Host interface
USB 3 — for 5G-grade throughput
Modem control
GPIO — wake / reset / power
Audio
PCM

Power

Input
5 V DC via Pi GPIO (USB-C alternative on some variants)
Cooling
Fanless

Compliance

Certifications
CE, UKCA (verify region before deployment)
Warranty
24 months manufacturer

What's in the box

  • EBD050 Calyx 5G HAT+ board
  • GPIO standoffs and screws
  • 4× 5G antennas (main + MIMO + diversity)
  • Quick start guide

Best for

Edge AI / inference at the cell tower

Run a model on the Pi, stream results upstream over 5G. Low latency, high throughput, no fixed-line needed.

Industrial digital signage

Multiple HD streams to the cloud or down from a CMS. 5G's headroom means you are not the bottleneck.

HD camera arrays and surveillance

Backhaul a Pi-managed array of IP cameras over a single 5G link. Combine with Cellular Private LAN to keep the feeds off the public internet.

Connected vehicle / mobile platforms

Pi handles vehicle logic; 5G keeps it connected as it moves. The EBD050 is small enough to fit into compact enclosures.

Frequently asked

Why USB 3 instead of just GPIO networking?
Full 5G can push throughputs above what the Pi's USB 2 interface can sustain. Using USB 3 keeps the link from becoming the bottleneck.
How is this different from the EBD070 (RedCap)?
The EBD050 is full 5G — top-tier throughput, more antenna paths, higher power draw, higher cost. The EBD070 is 5G RedCap — reduced capability, lower power, lower cost, sized for IoT use cases that don't need full 5G throughput. Pick by what you actually need.
Does it work with a Raspberry Pi Zero?
No — Pi 4 and Pi 5 only. The Zero's form factor and host interface don't support the HAT+ spec.
Does it ship with a SIM?
No — hardware only. The Developer Starter or Team Pack pair well; the Enterprise Starter's priority support is worth considering for mission-critical 5G deployments.
What's the warranty?
24 months manufacturer warranty from Teltonika. We handle returns and exchanges through the SIMSY shop.

Ships from the UK

Most orders dispatched same day or next working day via Royal Mail.

GB delivery

Mainland UK addresses only for v1. Get in touch for international.

14-day returns

Change your mind? See the returns policy.

Back to all products