Teltonika 951 PoE+ — Industrial Router | SIMSY Shop
Teltonika 951 PoE+
Power and data, one cable
Router
Tested with SIMSY

Teltonika 951 PoE+

The RUT951 PoE+ takes Teltonika's bestselling industrial router and adds a built-in PoE+ switch. One device that's your cellular uplink, your local Wi-Fi access point and the power source for up to three downstream PoE devices — IP cameras, APs, sensors, or a Pi rig. Built-in 4G LTE, dual-SIM, RutOS. The "everything in one box" choice for a remote installation.

Smart BuildingsEvent Cam SecureConnected Site MonitoringDevice Security
£225ex VAT
+£45 UK VAT · £270 inc VAT
Pair with a SIMSY SIM
Manufacturer
Teltonika
Model
951PoE+
Warranty
24 months

Key features

  • 4G LTE Cat 4 cellular + 802.11 b/g/n Wi-Fi
  • 4× Ethernet ports with PoE+ (1× PoE-in, 3× PoE-out)
  • Up to 30 W per PoE-out port, 90 W total budget
  • IEEE 802.3af/at compliant — works with any standard PoE device
  • Dual-SIM cellular with auto-failover
  • Industrial housing, RutOS and Teltonika RMS-compatible

Technical specifications

Cellular

RAT
4G LTE Cat 4
Throughput
Up to 150 Mbps DL / 50 Mbps UL
Fallback
3G + 2G
SIM slots
2× (auto-failover)

Wi-Fi

Standard
802.11 b / g / n
Band
2.4 GHz

Ports & PoE

Ethernet
4× 10 / 100 Mbps (RJ-45)
PoE standard
IEEE 802.3af / 802.3at (PoE+)
PoE-in
1× port (powers the router)
PoE-out
3× ports (powers downstream devices)
Per-port output
Up to 30 W
Total PoE budget
90 W

Physical

Housing
Industrial
Mounting
DIN-rail, wall mount

Software

Operating system
RutOS (OpenWrt-based)
VPN protocols
OpenVPN, IPsec, WireGuard, GRE, L2TP
Management
WebUI, SSH, SNMP, Teltonika RMS, SIMSY portal

Compliance

Certifications
CE, UKCA (confirm region before deployment)
Warranty
24 months manufacturer

What's in the box

  • RUT951 PoE+ router
  • 2× Wi-Fi antennas
  • 2× cellular (LTE) antennas
  • PoE injector + power supply
  • Ethernet cable
  • DIN-rail mounting kit
  • Quick start guide

Best for

Single-cable IP camera deployments

Router and PoE switch in one. Run a single Ethernet to each camera carrying both video back and power out. Combined with a SIMSY SIM for cellular uplink, no fixed line needed at all.

Pop-up surveillance and event sites

Drop in for a festival, market or temporary site. Power 3 PoE cameras straight off the router. Pack it down at the end.

Smart-building zone connectivity

Local Wi-Fi for staff, PoE-powered access points for visitors, cellular uplink for resilience. One unit for a floor or wing of a building.

Field offices and welfare cabins

Bring the router, plug in PoE for an outdoor camera and a desk phone, broadcast Wi-Fi for the team. Done in minutes.

Frequently asked

How many cameras can I power off it?
Up to three PoE+ devices on the three PoE-out ports, with 30 W per port and 90 W total budget. So three 20 W cameras is easy; three 30 W cameras is right at the edge of the budget.
Will it work with my existing PoE cameras?
Yes, as long as they're IEEE 802.3af or 802.3at (PoE+) compliant — which is most modern IP cameras. 802.3bt (PoE++) devices won't be fully powered.
Can the router itself run on PoE?
Yes — one of the four Ethernet ports is PoE-in, so the router can be powered over Ethernet from an upstream PoE injector. Useful when the unit is mounted somewhere awkward to reach with mains power.
Does it ship with a SIM?
No — hardware only. The Team Pack (5 SIMs) is a common pairing for camera-and-router deployments; one SIM for the router, the others for adjacent kit.
What's the warranty?
24 months manufacturer warranty from Teltonika. We handle returns and exchanges through the SIMSY shop.

Ships from the UK

Most orders dispatched same day or next working day via Royal Mail.

GB delivery

Mainland UK addresses only for v1. Get in touch for international.

14-day returns

Change your mind? See the returns policy.

Back to all products